Goliath ONLINE!

Forum for Blackops Featured Mods.

Moderators: lt_hawkeye, OrangeKNight, ExavierMacbeth

Goliath ONLINE!

Postby OrangeKNight » 15 Nov 2017, 23:03

Image

I haven't been working on BlackOps in quite some time but there are still some things I miss about that part of my life. Luckily some of those things can be made real!

I've actually had this guy sitting around for a couple of years now but only just recently got around to painting it! I'm glad to finally get it done, but that just means the Basilisks are next.....

Like what you see? Want to help support me and get one for yourself? You can pick one up right over here!
User avatar
OrangeKNight
Crusader
 
Posts: 29
Joined: 08 Mar 2012, 03:50
Has liked: 0 time
Been liked: 2 times

Re: Goliath ONLINE!

Postby Exotic_Retard » 16 Nov 2017, 00:06

thats pretty cool actually.

how tall is it? would be cool to have another photo with something for scale next to it

that looks like it could have movable joints; does it?

how long did this take you to make / paint?
I made the terrible mistake of voting for Tokyto_
User avatar
Exotic_Retard
Moderator
 
Posts: 1402
Joined: 21 Mar 2013, 22:51
Has liked: 539 times
Been liked: 581 times
FAF User Name: Exotic_Retard

Re: Goliath ONLINE!

Postby OrangeKNight » 16 Nov 2017, 21:09

Exotic_Retard wrote:how tall is it? would be cool to have another photo with something for scale next to it

that looks like it could have movable joints; does it?

how long did this take you to make / paint?

It's about 6cm/2.25" tall, there is a picture on the Shop page with an unpainted model next to a quarter.

No joints on this one but I'm working on a version that is more like a proper model kit. The Downside is it's going to cost 2-3 times as much due to the nature of 3D Printing.

It didn't take too long to make the model, I have the Original Goliath MKII model of course so I just had to remodel(to account for 3D printing requirements) using the original as a basis and then just sent it off to Shapeways to get printed. Painting took a few more hours again, I messed around with different color combos, originally only have 2 Greys and 1 Blue but eventually went with 3 of each.
User avatar
OrangeKNight
Crusader
 
Posts: 29
Joined: 08 Mar 2012, 03:50
Has liked: 0 time
Been liked: 2 times

Re: Goliath ONLINE!

Postby PsychoBoB » 17 Nov 2017, 14:19

I'd like to have a Harbinger on my desk. Who can help me? ;)
If you fear the dark you have never seen what light can cause!
PsychoBoB
Priest
 
Posts: 385
Joined: 12 Sep 2011, 09:25
Has liked: 148 times
Been liked: 28 times
FAF User Name: McNeil

Re: Goliath ONLINE!

Postby MayorDamage » 17 Nov 2017, 15:33

harbi would be one of the harder to print model with them spiny legs
MayorDamage
Avatar-of-War
 
Posts: 55
Joined: 29 Oct 2016, 16:22
Has liked: 4 times
Been liked: 5 times
FAF User Name: MayorDamage

Re: Goliath ONLINE!

Postby PsychoBoB » 17 Nov 2017, 19:12

MayorDamage wrote:harbi would be one of the harder to print model with them spiny legs

I know but it hasn't to be printed in one peace. Maybe each leg and the body seperate from each other.
If you fear the dark you have never seen what light can cause!
PsychoBoB
Priest
 
Posts: 385
Joined: 12 Sep 2011, 09:25
Has liked: 148 times
Been liked: 28 times
FAF User Name: McNeil

Re: Goliath ONLINE!

Postby OrangeKNight » 17 Nov 2017, 19:55

PsychoBoB wrote:I'd like to have a Harbinger on my desk. Who can help me? ;)

If I get some time this weekend I'll take a look at the Harbringer model, did you have any particular size in mind?
User avatar
OrangeKNight
Crusader
 
Posts: 29
Joined: 08 Mar 2012, 03:50
Has liked: 0 time
Been liked: 2 times

Re: Goliath ONLINE!

Postby PsychoBoB » 17 Nov 2017, 21:53

OrangeKNight wrote:If I get some time this weekend I'll take a look at the Harbringer model, did you have any particular size in mind?

Maybe 10 cm, it should definitely bigger than something from a Kinder surprise ;)
If you fear the dark you have never seen what light can cause!
PsychoBoB
Priest
 
Posts: 385
Joined: 12 Sep 2011, 09:25
Has liked: 148 times
Been liked: 28 times
FAF User Name: McNeil

Re: Goliath ONLINE!

Postby OrangeKNight » 17 Nov 2017, 23:57

PsychoBoB wrote:
OrangeKNight wrote:If I get some time this weekend I'll take a look at the Harbringer model, did you have any particular size in mind?

Maybe 10 cm, it should definitely bigger than something from a Kinder surprise ;)

Hmm, that'd be pretty big for printing, at least using Shapeways. The Harbringer is pretty spindly overall but still. You'd also run into the issue where the model isn't detailed enough to really work at that scale, the polys would really stand out.

That being said, changing scale is pretty easy, once I get the model out and clean it up a bit I can offer something a bit more specific and helpful.
User avatar
OrangeKNight
Crusader
 
Posts: 29
Joined: 08 Mar 2012, 03:50
Has liked: 0 time
Been liked: 2 times

Re: Goliath ONLINE!

Postby PsychoBoB » 18 Nov 2017, 11:03

Don't put too much effort in it. 5 cm would be fine as well.
If you fear the dark you have never seen what light can cause!
PsychoBoB
Priest
 
Posts: 385
Joined: 12 Sep 2011, 09:25
Has liked: 148 times
Been liked: 28 times
FAF User Name: McNeil

Next

Return to Blackops

Who is online

Users browsing this forum: No registered users and 1 guest